Aim to avoid flange single side press mode, this mode results in the flange pad failure due to the excessive extrusion. ...

1.Ability:226-3864KN 2.Applicable bolt:M27-M125 3.Maxium Working Pressure:1500bar    Hydraulic nut provide a kind of bolt tightening system that integrates with nut itself, quite fast, precise,reliable. This nut is the permanent replacement of traditional nut. No...

1.Specially work in high speed wire rod mill to unload and load the roll. 2.Special design service offered. 3.OEM offered. Hydraulic wrench for high speed wire rod to load and unload rollApplicative to the taper sleeve structure that is firmly with axial thread...

1.motor driving(220V),twin-stage 2.All aluminum shell,cooling sex strong,light weight 3.OEM offered KLW2000 Series Special pump for hydraulic wrenchlElectrical, double electrode, built-in bypass circuitlFull aluminum shell, high cooling ability,light body.lAdjustable relief...

1.When space is small,can choose open wrench head or stay wrench head 2.Used in very small space. 3.OEM Offered Ultra-thin Hydraulic Torque Wrench:l  Operate in very narrow spacel  Nut side space is very narrow, could choose open operation head.l  Nut top space is...

1.be used in high speed wire rod mill 2.Applied to axial thread axial thread solid cone sleeve structhre. lApplicative to the taper sleeve structure that is firmly with axial thread Order#ModelTorque range     N.mOpposite side of operation...

1.Range:From 1000 n.m,740 lbf.ft to 2000 n.m,1450 lbf.ft 2.In good and high quanlity 3.Color:red,blue,gray and so on Maximum output torque 2000N.m1.Diameter is 72mm, more closer to locked object2.Torque precision excess 4%3.Gear ratio above 25:1 torque multiplier is equiped with...

1.Min Torque 194N.m 2.Max Torque 72860N.m 3.TIAL-919 AL-TI alloy. 4.Multiple-function spare parts satisfy your special demand 1.Ultra-light aerospace material TIAL-919 AL-TI alloy, unibody, transmission parts is not exposed/not clamp the hand, free from the danger.2.Small...

1.The Max Torque from 735Nm to 2500Nm. 2.The Selection range from M12 to M33. 3.Convenient to operate. 4.High quanlity Torsional shear type electric wrench point the wrench head to the bolt head when working, pull the switch to start the work, seconds later, Bolt wabbler will...

1.Min Torque 302 N.m 2.Max Torque 39600 N.m 3.Plug-in card type changeable operation unit 4.Torque repeat presicion up to 3%. 1. Ultra-light aerospace material TIAL-919 AL-TI alloy, super light,super thin,adapt to every difficult space.2.Plug-in card type changeable...